Pinkenba QLD 4008 ยท Northside
EV Charger Installation Pinkenba
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Pinkenba. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Pinkenba is mostly industrial land between the airport and the river with a small pocket of houses, so workplace and fleet charging is the bigger need here.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Homes in Pinkenba's residential pocket
Pinkenba has only a few residential streets, and the houses there are mainly older timber and fibro homes. For these, the install is a regular home job: check the board, run a dedicated circuit to the carport or shed, and fit the charger where the car actually parks. Sheds set back from the house may need a longer run or a small sub-board, which we price up front.
Older homes like these often still have original or partly updated switchboards. If yours has ceramic fuses or no space for another breaker, we will quote a switchboard upgrade as a separate item so you can weigh it up before committing.
Some residents bring a work ute or van home. Electric vans and utes charge exactly like a car, and a 7kW wallbox overnight is usually enough to cover a working day of local deliveries or site visits, provided the vehicle is plugged in when it gets home.
How much does EV charger installation cost in Pinkenba?
A standard EV charger installation in Pinkenba costs from $990 inc GST with Connex Electrical for a house or townhouse garage, plus the charger. Older switchboards, long runs and three-phase chargers add to that, and apartment bays are quoted per building. Every job gets a fixed written price first.
| Situation | Price |
|---|---|
| Garage or carport close to a modern switchboard | From $990 installed (inc GST) |
| Older board with fuses or no safety switches | Standard price plus a switchboard upgrade, quoted separately |
| Apartment bay wired from your own meter, once the body corporate approves | Quoted after we check the car park route |
| Shared, load-managed chargers for the whole building | Staged quote for the body corporate |
Every standard install includes its own circuit and safety switch protection, the cable run within the standard length, mounting and setup, full testing and a Certificate of Testing and Compliance. The charger itself is extra unless you already own one.
Affordable EV charger installation in Pinkenba
- If you rent, a written scope of works makes it easy for your landlord to say yes.
- Mount the charger on the garage wall closest to the meter box. A shorter run is the easiest saving.
- Ask your committee about a building-wide plan. Sharing one backbone costs less per bay than one-off installs.
- Load management lets more chargers share the existing supply, avoiding a costly upgrade.
Pinkenba is about 23 km from our Mango Hill workshop, roughly 25 minutes down the Gateway Motorway. Business sites can be scheduled early or outside operating hours to keep disruption low.
Every Pinkenba job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
Workplace and fleet charging in Pinkenba
Most of Pinkenba is warehouses, logistics yards and port-related businesses. On sites like these, charging is about vehicles that return to base: delivery vans, pool cars and staff cars parked through a shift. A handful of chargers with load management can serve a small fleet without an expensive upgrade to the site supply.
Industrial sites often already have three-phase power, which opens up 11kW or 22kW AC chargers for vehicles that accept them. We start with a load assessment of the existing supply, then plan a layout that can grow as more vehicles change over. Our commercial charging page explains the process.
Yards bring their own needs: pedestal mounts, bollards to protect chargers from forklifts and trucks, and cable management so leads are never driven over.
How the installation works
- Step 1
Request a quote
Use the form or call us. Photos of the meter box and garage speed things up.
- Step 2
We confirm the details
Supply capacity, cable route and any Energex requirements are checked before we book.
- Step 3
We install
Circuit, protection and charger, usually done in 2 to 4 hours.
- Step 4
You start charging
We commission the charger with your car and leave you with your Certificate of Testing and Compliance.
Pinkenba EV charging FAQs
Can you install chargers for a small fleet at a Pinkenba warehouse?
Yes. We assess your site supply, look at how long each vehicle sits between runs and recommend charger sizes and numbers to match. Load management lets several chargers share the available capacity, and we can lay conduit for future bays at the same time. You get a staged plan and a fixed quote for the first stage.
How much does EV charger installation cost in Pinkenba?
A standard single-phase install in Pinkenba is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
How can I keep EV charger installation affordable in Pinkenba?
For houses, keep the charger close to the switchboard and choose a 7kW single-phase unit, so the install stays at the standard $990 inc GST. For apartments, a shared, load-managed plan for the building costs less per bay than one-off installs. Every quote is fixed, so there are no surprises on the day.
Should I get a 7kW or 22kW charger?
For most homes, 7kW is the right choice. It works on single-phase power and fully charges most EVs overnight. A 22kW charger needs three-phase supply and only charges faster if your car supports 22kW AC, which many models do not; several are capped at 7kW or 11kW. Spending extra on 22kW rarely pays off for a single household car.
Will my switchboard cope with an EV charger?
Usually yes, but older boards are the most common reason a quote goes up. A charger needs its own circuit with RCD protection and enough spare capacity in your supply. Boards with ceramic fuses, no room for new devices or no safety switches generally need an upgrade first. We check the board on the site visit or from photos and tell you before you commit.
Can an EV charger be installed outside?
Yes. Most wallboxes are rated for outdoor use, so a carport post or external wall is fine. We still look at placement: out of direct afternoon sun where possible, clear of where water pools, and where the cable reaches the charge port without stretching across a path. A pedestal mount works where there is no wall nearby.
Also installing near Pinkenba
See every suburb in Northside, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
Book your Pinkenba EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.