EV Charger Installation Tingalpa

Low-set homes and the cable route

A high-set Queenslander lets us run cable underneath the floor. Low-set houses like most of those in Tingalpa sit on a slab, so the usual path is up from the switchboard into the ceiling, across the roof space and down inside the garage wall. Done properly it is neat and hidden. It does mean a quick look in the manhole during the site check, and in summer we schedule that part of the job early, before the roof cavity gets too hot to work in.

Garages here are often single and attached to one end of the house, sometimes with the meter box on the opposite end. That can stretch the run to 15 metres or more, which affects cable size and price. We measure it rather than guess, so the quote you get is fixed.

Boards from this era vary. Some have been upgraded with safety switches on every circuit, others still have old rewireable fuses and a meter panel that is past its best. If yours needs work, we will say so at the site check and quote it separately.

EV charger installation cost in Tingalpa

In Tingalpa, most home EV charger installs come in at Connex Electrical's standard price of $990 inc GST, with the charger extra unless you already own one. What can add to it is distance from the switchboard to your parking spot, the condition of the board, and whether you want three-phase. All of that is priced upfront in writing.

Included as standard: a new charger circuit and protection at your switchboard, cabling within the standard allowance, mounting, app setup, testing and a compliance certificate. The charger itself is extra unless you already own one.

Keeping your Tingalpa install affordable

• Choose a 7kW single-phase charger. It suits almost every household and avoids three-phase costs.
• Charge overnight on an off-peak tariff, or from surplus solar, to keep running costs low.
• Already have a charger from the dealer? We install it, so you only pay for installation.
• Mount the charger on the garage wall closest to the meter box. A shorter run is the easiest saving.

From Mango Hill we take the Gateway Motorway straight to Tingalpa, about 28 km and roughly 30 minutes when traffic is moving, which suits a first job of the day.

Every Tingalpa job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.

Tingalpa install considerations

Tingalpa sits close to the Gateway Motorway's Wynnum Road interchange, which makes it an easy base for commuting either north to the airport side or south towards the Pacific Motorway. If your daily drive is long, it is worth working out how many kilometres you cover and checking that a 7kW charger refills that overnight. For most people it does with hours to spare.

Where an older home has been replaced with a new two-storey build, the job is usually simpler: a double garage, a modern board and often room for the extra circuit.

If you have a controlled-load hot water system, we can talk through whether charging on a controlled-load tariff or a time-of-use plan suits you better. Your retailer sets the rates, so we explain the trade-offs rather than quote prices. See what an install costs for the full price picture.

How the installation works

1. Step 1

   Quote

   Send photos of your switchboard and charger spot, or call. We reply with a fixed written price.

2. Step 2

   Site check

   If anything is unusual, such as a long run or an older board, we check it in person first.

3. Step 3

   Install

   Most standard installs take 2 to 4 hours on the day.

4. Step 4

   Test and certify

   We test, commission the charger with your car and issue your Certificate of Testing and Compliance.

Also installing near Tingalpa

• Hemmant
• Wynnum West
• Cannon Hill
• Carina
• Murarrie
• Manly West

See every suburb in Eastern Suburbs, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.