Draper QLD 4520 ยท Moreton Bay
EV Charger Installation Draper
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Draper. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Draper is acreage on the eastern side of the Samford Valley, where newer homes on large lots often have a detached garage and room for solar.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Draper homes and detached garages
Draper is mostly residential acreage, with a mix of established homes and newer builds on large lots. A detached garage or carport set apart from the house is common, and that means the main question is how to get power from the switchboard to the car.
Newer homes often have modern boards with plenty of space, and some were built with conduit already run to the garage. If yours was, the job can be quick. Older homes may need a new sub-main or board work first.
If you are building in Draper, ask your electrician to run a dedicated cable or conduit to the garage at the slab stage. It costs far less than trenching later, and we can then install the charger whenever you buy the car.
Most Draper residents drive to Samford, Eatons Hill or toward the city, and single-phase 7kW charging covers those trips easily.
Planning for space and sun
Large blocks mean large roofs, and solar is popular in Draper. A charger that follows solar output can fill the car with surplus daytime generation. If you also have a home battery, we can set limits so the car does not drain it.
Trenching across lawns, gardens and driveways is often involved. We discuss the route with you and choose one that avoids irrigation and septic lines. Where a run would cross a sealed driveway, boring underneath can be an alternative to cutting it.
If you are weighing up a larger charger for a big Draper home, the October 2026 change to Energex's rules matters: single-phase 32A units got simpler, while three-phase sites still need checking, and we handle that step. Our solar EV charging guide has more detail.
Our four-step process
- Step 1
Request a quote
Use the form or call us. Photos of the meter box and garage speed things up.
- Step 2
We confirm the details
Supply capacity, cable route and any Energex requirements are checked before we book.
- Step 3
We install
Circuit, protection and charger, usually done in 2 to 4 hours.
- Step 4
You start charging
We commission the charger with your car and leave you with your Certificate of Testing and Compliance.
EV charger installation cost in Draper
Most Draper installs start at $990 inc GST for a standard single-phase charger near the switchboard. Because many blocks here are larger, the cost often depends on how far the parking spot is from the board and whether trenching is needed. Connex Electrical quotes those items separately and in writing.
| Situation | Price |
|---|---|
| Attached garage near the switchboard | From $990 installed (inc GST) |
| Shed or detached garage with its own sub-board | Standard price plus cable, quoted from photos or a visit |
| Trenching across the block to the parking spot | Quoted per job |
| Existing three-phase supply for a faster charger | Quoted per job |
Included as standard: a new charger circuit and protection at your switchboard, cabling within the standard allowance, mounting, app setup, testing and a compliance certificate. The charger itself is extra unless you already own one.
Affordable EV charger installation in Draper
- Park and charge in the garage nearest the house switchboard if you can. Trenching is the biggest extra on acreage.
- Send photos of the main board, any shed sub-board and the route between them.
- Pick the charger spot before trenching for anything else, so one trench can carry both.
- If the shed already has a sub-board with spare capacity, the charger can often run from there.
Draper is about 19 km from Mango Hill, roughly 25 minutes of driving. Site visits for acreage jobs are booked as a dedicated slot.
Every Draper job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
Your questions, answered
I'm building a new home in Draper. What should I prepare for an EV charger?
Ask your builder's electrician to run a suitably sized cable or empty conduit from the switchboard to the garage, and leave space on the board for a dedicated circuit. That makes the later install quicker and cheaper. We can advise on cable size and charger placement before the slab goes down.
How much does EV charger installation cost in Draper?
A standard single-phase install in Draper is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
How can I keep EV charger installation affordable in Draper?
Charge in the garage nearest the main switchboard, so the install stays at the standard $990 inc GST. If the parking spot is further away, plan one trench for every service and use an existing shed sub-board if it has capacity. Every quote is fixed, so there are no surprises on the day.
My house is fairly new. Is installation simpler?
Usually, yes. Homes built in the last 15 to 20 years tend to have modern switchboards with safety switches and spare space, and the garage is often close to the board. That keeps most installs at the standard price. We still confirm your supply capacity, especially if you have ducted air conditioning, a pool or an existing solar system.
Can you install a charger on an acreage property?
Yes. Acreage installs often involve a shed or garage some distance from the house, so the main questions are cable size, trenching and whether the shed already has a sub-board with enough capacity. Some acreage homes already have three-phase for pumps or workshops, which opens up faster charging. We quote the trenching and cable separately so the costs are clear.
Do I need Energex approval to install an EV charger?
Energex rules for home EV chargers changed in October 2026, and we check the current requirements for your connection and lodge any notification Energex needs. For a typical single-phase home charger you do not need to apply for anything yourself. Three-phase chargers and multi-charger sites can need more checks against your connection, and we work through those before installation day.
Other suburbs around Draper
See every suburb in Moreton Bay, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
Book your Draper EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.