Tennyson QLD 4105 ยท Southside
EV Charger Installation Tennyson
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Tennyson. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Tennyson is a small riverside suburb where apartments at Tennyson Reach sit beside older houses, so charger jobs here split between body corporate projects and single homes.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Two kinds of charging job in Tennyson
The Tennyson Reach apartments, built on the old Tennyson power station site beside the Queensland Tennis Centre, are the largest group of homes in the suburb. In a building like that, an owner wanting a charger needs body corporate approval, a metering arrangement and, ideally, a plan the building can expand. Load management stops several chargers from overloading the building's supply. We provide a written proposal that covers these points for the committee.
The houses on Tennyson's other streets are a mix of older timber homes and newer builds. Raised homes often let the cable run neatly under the floor to a carport or garage. Older boards may need upgrading first, and we will tell you up front.
A house install here usually takes a few hours. An apartment install depends far more on approval timing than on the work itself.
What an EV charger install costs in Tennyson
Expect from $990 inc GST for a standard single-phase install in a Tennyson house or townhouse, with the charger extra. The price changes with distance from the switchboard and the board's condition, and apartment buildings are quoted per site. Connex Electrical puts every extra in a fixed written quote.
| Situation | Price |
|---|---|
| Garage or carport close to a modern switchboard | From $990 installed (inc GST) |
| Older board with fuses or no safety switches | Standard price plus a switchboard upgrade, quoted separately |
| Apartment bay wired from your own meter, once the body corporate approves | Quoted after we check the car park route |
| Shared, load-managed chargers for the whole building | Staged quote for the body corporate |
Every standard install includes its own circuit and safety switch protection, the cable run within the standard length, mounting and setup, full testing and a Certificate of Testing and Compliance. The charger itself is extra unless you already own one.
How to pay less for a charger in Tennyson
- Send clear photos of the switchboard and charger spot, so we can quote without a site visit.
- Load management lets more chargers share the existing supply, avoiding a costly upgrade.
- Ask your committee about a building-wide plan. Sharing one backbone costs less per bay than one-off installs.
- If you rent, a written scope of works makes it easy for your landlord to say yes.
Tennyson is about 32 km from Mango Hill, roughly 35 minutes via the Gateway and the inner southside. Apartment quotes usually start with a visit to the car park and meter room.
Every Tennyson job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
Tennyson on the river
Tennyson sits on a bend of the Brisbane River, and some low-lying land near the water is flood-affected. If your home is in one of those areas, we keep the charger and new electrical equipment as high as practical. Brisbane City Council's flood maps show the level of risk for each address.
Tennyson's own small rail station sits on the Beenleigh line, and the suburb is close to the Ipswich Road and Fairfield Road corridors. Many residents drive less than average, so a modest charger setup is often enough.
If you are a committee member weighing up building-wide charging, our page on load-managed commercial charging explains how buildings start small and add bays.
How the installation works
- Step 1
Request a quote
Use the form or call us. Photos of the meter box and garage speed things up.
- Step 2
We confirm the details
Supply capacity, cable route and any Energex requirements are checked before we book.
- Step 3
We install
Circuit, protection and charger, usually done in 2 to 4 hours.
- Step 4
You start charging
We commission the charger with your car and leave you with your Certificate of Testing and Compliance.
Tennyson EV charging FAQs
How do I get a charger approved at Tennyson Reach?
Start by asking your body corporate manager about any existing EV by-laws or plans. Then request a written proposal from a licensed electrician showing the cable route from your meter, how power will be billed and how the building supply is protected. We prepare that proposal for you to submit, which gives the committee the details it needs to decide.
How much does EV charger installation cost in Tennyson?
A standard single-phase install in Tennyson is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
How can I keep EV charger installation affordable in Tennyson?
For houses, keep the charger close to the switchboard and choose a 7kW single-phase unit, so the install stays at the standard $990 inc GST. For apartments, a shared, load-managed plan for the building costs less per bay than one-off installs. Every quote is fixed, so there are no surprises on the day.
How can a body corporate add EV charging for the whole building?
Start with a load assessment of the building supply, then plan a shared or individual charger layout with load management so many cars can charge without a costly supply upgrade. Billing can run through the charger software or sub-metering. We provide the assessment, a staged plan and a fixed quote for the first chargers.
What is load management on an EV charger?
Load management lets the charger slow down when the rest of the property is drawing a lot of power, then speed up again when demand drops. It protects your main supply from overloading, so you can often avoid a costly supply upgrade. It is standard practice in apartments and businesses and useful in homes with big loads like ducted air conditioning.
Does flood risk affect where the charger goes?
It can. In flood-affected streets we mount the charger and any new electrical equipment as high as practical and consider the garage floor level and the switchboard position. Brisbane City Council's flood overlay maps show your property's risk. We will talk through placement on the site visit so the install is sensible for your block.
Also installing near Tennyson
See every suburb in Southside, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
Book your Tennyson EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.