Rothwell QLD 4022 ยท Moreton Bay
EV Charger Installation Rothwell
Connex Electrical, a licensed electrical contractor (#92217) based in Mango Hill, installs EV chargers in Rothwell. Standard home installs are from $990 installed (inc GST), take about 2 to 4 hours and come with a fixed written quote. Rothwell is next door to our Mango Hill base, and its brick homes from the 1980s onwards usually need little more than a check of the switchboard.
- Licensed electrical contractor #92217
- $20M public liability
- Local team based in Mango Hill
- Fixed written quotes
- Read our Google reviews
Close to home for us
Because Rothwell borders Mango Hill, follow-up visits are easy. If a charger needs a settings change for a new car, a firmware update that will not complete, or a second unit added later, we are only a few minutes away. That proximity also means we can check a board in person before quoting if photos leave any doubt.
Anzac Avenue carries most of the peninsula's traffic past Rothwell, and many residents drive it every day. If you are weighing up a time-of-use plan against a controlled-load tariff for overnight charging, we can explain how each is wired at the meter so you can compare offers from your retailer with the facts in hand. Our installation cost guide covers what changes the price.
Charging at a Rothwell house
Rothwell's streets are mostly low-set brick homes on standard suburban blocks, built from the 1980s onwards, with newer pockets where estates filled the gaps. Most have an attached garage, and where the meter box is on the same wall, the install is about as simple as it gets.
The age of the house tells us roughly what to expect inside the meter box. A 1980s board may be full, or protected by a single safety switch, and adding a 32 amp circuit can mean rearranging or replacing it. A home built in the last fifteen years usually has spare positions and modern protection already. Send a photo of your open switchboard with the quote request and we can tell you which group you are in.
With Rothwell station on the Redcliffe Peninsula line and the Bruce Highway a short drive away, most local commutes are modest, so a single-phase charger is all you need.
EV charger installation cost in Rothwell
A standard single-phase EV charger installation in Rothwell costs from $990 inc GST with Connex Electrical, plus the charger if you need one. Most Rothwell houses pay just that. The price only rises for a long cable run, an older switchboard that needs upgrading, or a three-phase charger, and you see any extra in a fixed written quote first.
| Situation | Price |
|---|---|
| Garage or carport close to a modern switchboard | From $990 installed (inc GST) |
| Charger on the far side of the house, or a detached garage | Standard price plus the extra cable, quoted from photos |
| Older board with fuses or no safety switches | Standard price plus a switchboard upgrade, quoted separately |
| Three-phase home with an 11kW or 22kW charger | Quoted per job |
Every standard install includes its own circuit and safety switch protection, the cable run within the standard length, mounting and setup, full testing and a Certificate of Testing and Compliance. The charger itself is extra unless you already own one.
Keeping your Rothwell install affordable
- Choose a 7kW single-phase charger. It suits almost every household and avoids three-phase costs.
- If a second EV is coming, size the cable for it now rather than paying for a second callout later.
- Mount the charger on the garage wall closest to the meter box. A shorter run is the easiest saving.
- Charge overnight on an off-peak tariff, or from surplus solar, to keep running costs low.
Rothwell is under 4 km from Mango Hill, about 5 minutes by car, so it is one of the quickest suburbs for us to reach.
Every Rothwell job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.
From quote to first charge
- Step 1
Quote
Send photos of your switchboard and charger spot, or call. We reply with a fixed written price.
- Step 2
Site check
If anything is unusual, such as a long run or an older board, we check it in person first.
- Step 3
Install
Most standard installs take 2 to 4 hours on the day.
- Step 4
Test and certify
We test, commission the charger with your car and issue your Certificate of Testing and Compliance.
Nearby suburbs we also cover
See every suburb in Moreton Bay, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.
EV charger questions from Rothwell
How soon can you get to Rothwell for a quote?
Usually within a few days. Rothwell is next door to our base, so site visits slot in easily around other work. If you would rather skip the visit, clear photos of your switchboard, meter box and parking spot are often enough for us to give a fixed written price, and we will say so if they are not.
What does it cost to install an EV charger in Rothwell?
A standard single-phase install in Rothwell is from $990 inc GST with Connex Electrical, plus the charger unless you already have one. Long cable runs, switchboard upgrades and three-phase chargers cost extra and are quoted in writing first. Most installs take 2 to 4 hours.
What is the most affordable way to install an EV charger in Rothwell?
Put the charger close to the switchboard, choose a 7kW single-phase unit and send photos so we can quote without a visit. If you already have a charger, you only pay for installation, at the standard $990 inc GST. Every quote is fixed, so there are no surprises on the day.
Will my switchboard cope with an EV charger?
Usually yes, but older boards are the most common reason a quote goes up. A charger needs its own circuit with RCD protection and enough spare capacity in your supply. Boards with ceramic fuses, no room for new devices or no safety switches generally need an upgrade first. We check the board on the site visit or from photos and tell you before you commit.
What is the cheapest way to charge an EV at home in Brisbane?
Charging from your own surplus solar is cheapest, followed by charging overnight on a time-of-use or controlled-load tariff. Energex controlled-load tariffs (Tariff 31 and 33) run on a separate circuit with supply only during set hours, so they suit overnight charging but not daytime solar charging. A time-of-use plan on a smart meter is the usual alternative. Your retailer sets the actual rates. We can wire the charger to suit whichever plan you choose.
My house is fairly new. Is installation simpler?
Usually, yes. Homes built in the last 15 to 20 years tend to have modern switchboards with safety switches and spare space, and the garage is often close to the board. That keeps most installs at the standard price. We still confirm your supply capacity, especially if you have ducted air conditioning, a pool or an existing solar system.
Book your Rothwell EV charger install
Send a few details and photos of your switchboard and charger spot. Most homes can be quoted without a visit.
Call 0474 207 609Connex Electrical, QLD Electrical Contractor Licence #92217. $20M public liability. Based in Mango Hill, servicing Brisbane and Moreton Bay.