EV Charger Installation Kedron

Commuting from Kedron

Airport Link starts in Kedron and Gympie Road runs straight through, so the suburb is a natural base for people who drive to the city, the airport or the north. That driving adds up, and a dedicated wallbox quickly proves more useful than a portable cable on a power point.

For high-mileage drivers, a 7kW charger left on overnight recovers well over a typical day's driving, and scheduling it for your off-peak hours keeps the cost in check. Ask us about a Tesla Wall Connector or another brand if you already know what you want.

Where a carport faces the street, a charger with PIN or app control stops anyone else using it.

Kedron houses and their switchboards

Most of Kedron's housing is post-war: timber and fibro homes from the 1940s and 50s, with later brick in some streets and newer units close to Gympie Road. Many of the older houses have had a board change already, often when air conditioning or solar went in, and those are the easy jobs: a new circuit, an RCBO and the wallbox, done in a morning.

Others still have a board added to bit by bit since the house was built. If yours has no free spaces, old fuses or a main switch too small for the extra load, we will say so in the quote and price the upgrade as a separate item.

On low-set homes on a slab, the cable usually goes through the roof space and down inside the garage wall. On high-set homes, it runs under the floor, which is quicker and keeps the job tidy.

What an EV charger install costs in Kedron

A standard single-phase EV charger installation in Kedron costs from $990 inc GST with Connex Electrical, plus the charger if you need one. Most Kedron houses pay just that. The price only rises for a long cable run, an older switchboard that needs upgrading, or a three-phase charger, and you see any extra in a fixed written quote first.

Included as standard: a new charger circuit and protection at your switchboard, cabling within the standard allowance, mounting, app setup, testing and a compliance certificate. The charger itself is extra unless you already own one.

Affordable EV charger installation in Kedron

• Send clear photos of the switchboard and charger spot, so we can quote without a site visit.
• Mount the charger on the garage wall closest to the meter box. A shorter run is the easiest saving.
• Already have a charger from the dealer? We install it, so you only pay for installation.
• Charge overnight on an off-peak tariff, or from surplus solar, to keep running costs low.

Kedron is about 18 km from Mango Hill, roughly 25 minutes from our workshop depending on Gympie Road traffic, so morning installs are easy to schedule.

Every Kedron job gets a fixed written price before any work starts, so the quote is what you pay. For a line-by-line breakdown, see the EV charger installation cost guide for Brisbane, or call 0474 207 609.

From quote to first charge

1. Step 1

   Quote

   Send photos of your switchboard and charger spot, or call. We reply with a fixed written price.

2. Step 2

   Site check

   If anything is unusual, such as a long run or an older board, we check it in person first.

3. Step 3

   Install

   Most standard installs take 2 to 4 hours on the day.

4. Step 4

   Test and certify

   We test, commission the charger with your car and issue your Certificate of Testing and Compliance.

Nearby suburbs we also cover

• Chermside
• Wavell Heights
• Gordon Park
• Kalinga
• Stafford Heights
• Stafford

See every suburb in Northside, or read about home EV charger installation, commercial and body corporate charging and the cost of installation in Brisbane.